Glass Shot for Peening AGB-30

1) Product Introduction
Glass shots for peening has the features of chemical stability, high mechanical intensity and hardness. They can be blasted onto the object surface with compressed air and can be used on compress glass, rubber, plastic, moulds with metal casting or compressing. The jetting balls would help reduce elasticity of the surface materials and increase wearing capacity. 
2)  Product Specification 
see the szie table

 

 

3) Technical references 
Appearance: Clean and transparent, no visible bubbles and impurity.
Density:2.4-2.6g/cm3
Hardness:6-7(Moh's)
Spherical beads:≥75%
SiO2 content:>72%
 
4) Package
1.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm; the outer is plastic woven bag to prevent leak or damp. The net weight of each bag is 25±0.2kg.
2.Using double-deck package, the inner is polythene film and its thickness is not less than 0.5mm, the outer is paper-plastic compound bag to prevent leak or damp. The net weight of each is 25±0.2kg.
3.According to clients' requirement.

Size table : Glass shot for peening AGB-30

Table 1 Media Guide